User Manual & Datasheet
Nilochecker 500 - User Manual
Nilochecker 500 - Datasheet
Nilochecker probes
DG126 - Datasheet
PT120 - Datasheet
User Manual & Datasheet
Nilochecker 500 - User Manual
Nilochecker 500 - Datasheet
Nilochecker probes
DG126 - Datasheet
PT120 - Datasheet
Gas Measurements
Gas measurements inside incubators have always been tricky to perform - especially when it comes to gas analyzers that aspirates gas out of the incubator. Desktop incubators' stability are influenced by even the smallest gas aspirations. The NiloChecker gas sensor is placed inside the incubator without influencing inside conditions, and without the need to aspirate gas. It even supports averaging over longer periods.
DG112 Benefits
This new combined Carbon dioxide (CO2) and Oxygen (O2) probe is revolutionary in its design and performance. Due to the very flat design and flexible connection, the probe can be inserted into any incubator, including desktop types. By measuring inside the incubator and not pumping gas out, measurement results are more precise.
Technical data:
Measuring range: 0 to 30% O2 and 0 to 10% CO2
Accuracy: 0,2% O2 and 0,1% CO2 +/-3% of measured value.
Operating conditions: 0-50°C
T90: <20 sec for O2, <15 sec. for CO2
Temperature compensated: Yes (20-40°C)
Altitude compensated: Yes (700-1100 mbar)
Display Resolution: 0,1 %
Display updates: 1 per second.
Housing dimensions: (LxWxH): 84x56x17 mm
Cable length: 1,5m -1,7m (hereof 0,5m Flat Cable or 0,25m Very Flat Cable).
Housing materials: Aluminum and Nylon, IP 50.
Cable materials: TPE (Flat part), PVC (Round part)
Compliance: IS/EN61010-1 and RoHS.
Calibration: Delivered Factory calibrated. Can be calibrated in accordance to ISO/IEC 17025.
Download product sheet
DG112 - Product sheet - English
DG112 - Product sheet - Other languages
User Manual & Datasheet
Nilochecker 500 - User Manual
Nilochecker 500 - Datasheet
Nilochecker probes
DG126 - Datasheet
PT120 - Datasheet
User Manual & Datasheet
Nilochecker 500 - User Manual
Nilochecker 500 - Datasheet
Nilochecker probes
DG126 - Datasheet
PT120 - Datasheet
Gas Measurements
Gas measurements inside incubators have always been tricky to perform - especially when it comes to gas analyzers that aspirates gas out of the incubator. Desktop incubators' stability are influenced by even the smallest gas aspirations. The NiloChecker gas sensor is placed inside the incubator without influencing inside conditions, and without the need to aspirate gas. It even supports averaging over longer periods.
DG112 Benefits
This new combined Carbon dioxide (CO2) and Oxygen (O2) probe is revolutionary in its design and performance. Due to the very flat design and flexible connection, the probe can be inserted into any incubator, including desktop types. By measuring inside the incubator and not pumping gas out, measurement results are more precise.
Technical data:
Measuring range: 0 to 30% O2 and 0 to 10% CO2
Accuracy: 0,2% O2 and 0,1% CO2 +/-3% of measured value.
Operating conditions: 0-50°C
T90: <20 sec for O2, <15 sec. for CO2
Temperature compensated: Yes (20-40°C)
Altitude compensated: Yes (700-1100 mbar)
Display Resolution: 0,1 %
Display updates: 1 per second.
Housing dimensions: (LxWxH): 84x56x17 mm
Cable length: 1,5m -1,7m (hereof 0,5m Flat Cable or 0,25m Very Flat Cable).
Housing materials: Aluminum and Nylon, IP 50.
Cable materials: TPE (Flat part), PVC (Round part)
Compliance: IS/EN61010-1 and RoHS.
Calibration: Delivered Factory calibrated. Can be calibrated in accordance to ISO/IEC 17025.
Download product sheet
DG112 - Product sheet - English
DG112 - Product sheet - Other languages
